• Please review our updated Terms and Rules here
  • Exhibitor application for VCF West 2022 is now open! If you are interested in exhibiting, please fill out the form here.

New profile posts

Where in California?

I'm in San Diego and have a 4 NGA in a 4D case with a clustered arrow keyboard sitting here. gotek and DSDD in the lower drive bay, stock bay in the upper. Has a 4D (green) monitor which was NOS.

In essence a 4D with a 4 non-gate-array main board.
A
arnuphis
Sounds awesome. Cosmetically good? I am in Sacramento.
I had some spare time today so I updated my comments about the Olivetti L1M20 memory map above 512K. I also included some old MS-DOS/PC-DOS utilities for PC-DOS version 2.00 more or less. Other L1m34 notes. But I did not include any disassemblers or cross-compilers or cross-translators.
Robert

I hope this method of contact is OK.

1. I scanned documents for the NCR PC8. How can I contact the Oldcomputers-ddns.org website? I didn't find an email address.

2.My DMV is booting again with Gotek. Do you know anyone who has a DMV 10Mb image I could use with David Gesswein's MFM emulator? I'm still having no success with the hard drive.

Best regards

Jon Hales
By any chance are you still interested in the AST Ascentia A series laptops? I have 4 AST's & 2 Samsung Sens 500's (same but blue) in various states of repair. No AC adapter found yet so all untested 4 now. 2 of the AST's are missing keyboards, floppy drives, hard drives, CPU & maybe more? AKA parts machines. The other 4 seem complete with floppy drives and maybe batteries.

Don B.
Hi I just found your post.

I am member of a Multibus email group in US, UK and elsewhere. I'm interested in your Xenix floppy disks and the hard drive.

Did you offer the SYP312 for sale on VCF - or on eBay or other online sales platform? If the system has a new owner, I'd like to about getting copies of the disks.

If not, one of my friends near LA might collect.

Regards

Jon Hales
How many 5.25-inch floppies?
M
mhkohne
I'm not sure what you are referencing here?
M
mhkohne
WAIT! You must mean the MS-DOS disks. Unfortunately, I just went to look and they aren't where I put them. I'm sorry, it looks like they got into the wrong pile when cleaning. My apologies.
Hi Geoff, yes, if you could send me that correct image, that would be greatly appreciated. My direct email address is davidk@blackice.com.au if that assists.

If you are interested in the other images let me know as I hope to have them all on my PC later.

Thanks
David
Hi, I am interested in the Compaq LTE 5300. I Have one thats a parts unit, and hopefully can make it functional again.
Hello! Do you have any of those 2MB RAM expansions for IBM PS/1 2011? If you have any, I will very gladly buy one.

At the moment I have 161/163 errors as my Dallas chip has run out and also floppy is not working properly. I ordered a NOS Dallas chip.

After RAM upgrade, the next thing I would like to find out if there's any method to use SD or CF cards.

All the best
Timi
W
whaka
i replied in my sell trade for ram extension.
i also worked and actually have some working prototypes for adding isa slots outside the central unit, and allow use of xtide/cf, and whatever you need as long it don't draw a lot of current.


but to get xtide/cf it to work, bios need to be patched first.
your floppy may not work correctly just because of the flat dallas :)

cheers.
Is this a Computer that is running Software for a O'Scope? There is no Floppy attached to a TDS7104 O'Scope?

Best case is to locate the battery, remove it (or set jumper for clear CMOS settings if Motherboard has such jumpers)
and then power back up. It will correct the values to default.

What is Manufacture of Motherboard? I'd start there and find a Manual for it on how to clear CMOS settings.


Larry

Attachments

  • killcmos.zip
    7.1 KB · Views: 0
  • CMOSREST.ZIP
    2.7 KB · Views: 0
  • CMOSSAVE.ZIP
    4 KB · Views: 0
  • CMOS16.ZIP
    15.1 KB · Views: 0
  • CMOSER2.ZIP
    25.9 KB · Views: 0
  • CMOSER11.ZIP
    28 KB · Views: 1
  • Like
Reactions: super7800
super7800
super7800
Ok thanks. I responded to your message on the main post.
Hello,

i was curious if you had a build thread anywhere for this LCD-286/386 screen conversion you posted about back in 2017?


it looks really slick and id like to mimic your process if you're able to share?

Thanks!
The CP/M 3 Plus is available on Archive.org and also on Humongous CP/M Archive.

I have the following files
CPM+ v3 for Model 4 Reference (1983)(Digital Research).pdf.7z
26-2216.zip

https://archive.org/details/model-4...y-26-2216]/url] ldkraemer@gmail.com. Larry
Hallo Ruud, ik zag jouw bericht over het toetsenbord voor de PET 2001 B
Heb jij een soortgelijk toetsenbord of een originele met rubber doppen onder de toetsen
Ik denk dat ze beiden kunnen op de PET 2001
Welke heeft U en wat zou U ervoor willen vragen ?
Alvast erg bedankt, groeten Ad
Hi, Marion. I have a couple of IBM 6x86 chips:

IBM26 6x86-2V2120GB (front)
Copyright USA 1995 Cyrix, + datecode on rear

I also have an IBM 6x86MX PR233 marked as "SAMPLE" (2.5x 75MHZ-2.9V CORE) and another with IBM26x86MX-AVAPR233GB 2.0x 83MHZ-2.9V CORE. And there's a final one with no markings at all on the front - probably a line test sample.
K
keke
Hi Steve, just saw your message now.

Can you share some photos? Interested about last two for sure, first one I have at least one - but please send a photo as well. To and bottom to check codes and pins.

Thanks, Marian
Top