Thanks for the help modem7.
Just resetting the switches did the trick for me.
I really didn't do anything different other than that.
I finally got the splash screen and the CF card is detected (Master at 300h:CF card)
I had a DOS 6.22 installation there that works under virtualbox but I...
Ok so how do I make this work?!
Do I need to configure the image before writing it?
I thought there would be a generic image that would work with a default setting or so..
BTW I probably meant SW 2.2 not 2.1 (eeprom write)
I also tried the .bin in the malinov page (27c64 again)
I clearly don't...
Hi all,
I've just finished a XT lite 4.1 board and flashed a 27c64 with an image named ide_xtl.bin but I get no universal bios splash upon boot, no led activity as well..
The .bin I've used I've found here
https://www.xtideuniversalbios.org/binaries/r622/Is there something I'm missing...
Hi all,
I've got a Macintosh SE FDHD with a non functioning SCSI drive and replaced it with another drive I had in my spares box.
It's a 250MB Quantum Pro Drive LPS and has an Apple logo on it.
It looks indentical to this one...
Hi all,
first post here.!
I've got a Commodore Pet 2001 (model with 2114 ram ICs and 2316B ROMs pcb v.320137).
The unit was in bad shape very dirty and the fuse was blown.
The power cables to the PCB were not crimped to a connector but soldered in place and the 4th wire of the PCB power...