Yes, I have both the COCO3 and MC-10 so I can try the CSAVE,A
The more gray hair I get, the hazier the memories but I can definitely come up with some clever hopes...lol
Thanks for your help...much appreciated...I'll reply after trying the CSAVE, A (probably tomorrow).
Scott
Is there another way to get it onto the MC-10?
Here's the program...
10 REM**********************************
20 REM TRS-80 C. G. P. APPLICATION
30 REM**********************************
32 ON ERROR GOTO 1600: REM MODEL II ONLY
40 LPRINT CHR$(19)
50 LPRINT CHR$(18); "S4" : LPRINT "C0"
60 LPRINT...
Hi Krebizfan,
I thought I had heard something about the token issue.
So basically that means if I have a program that happens to avoid the incompatible tokens, it will be fine.
But, if I have a program that uses even 1 incompatible token, the load will fail?
Also, I'm actually going from COCO 3...
Hello everyone,
I have several programs on my TRS-80 Color Computer 3 that I have saved to cassette tape.
I was hoping to just read them into an MC-10 that I have.
When I CLOAD on the MC-10, it finds the program and immediately errors out with an OM Error (Out of Memory).
There's no way this...
Hello Everyone,
I've completely stripped the polarizing film from the front and rear of the glass screen and have ordered new adhesive replacements.
I seem to have a major problem with the zebra strips...
There are normal zebra strips on the top and bottom edges of the screen; However, the left...
Well, I talked with Jeff Birt and he gave me some great direction.
I've stripped the front polarizer film off as well as the back reflective polarizer film.
It was the back one that was totally trashed.
Looks like the glue used to adhere the reflective film to the polarized film was defective...
Thanks cjs,
Yes, I have researched how to do it with polarizer laminations.
My biggest issue is that I'm not 100% sure this screen uses the polarizer laminations.
I also assume it uses the zebra stripe connectors which can be a pain to realign.
I'm just hoping someone can say "Yes, I've done it...
Hello,
I recently acquired an Epson PX-8 Geneva that is in excellent condition (except for LCD screen).
I have torn it apart, replaced the batteries and tape drive belt and it is fully functional.
The problem is that the LCD screen is a disaster (see attached image).
I can read the text and the...
Hello everyone,
I just purchased a Dial-a-ROM for my Epson HX-20 and I cannot find any directions on how to call the ROM areas.
On my TRS-80 M100 it's very simple using a CALL statement within BASIC to activate the chosen ROM file.
I've tried several obvious things like...
I have a new issue...When I try to format a 40 Track SS-SD Floppy disk, it takes about 10 minutes, goes up to about 340 on the counter, and then gives me a "Disk Error 41".
Anyone seen this issue before? Any help would be appreciated.
Thanks