thunter0512's latest activity

The 1903 Wright Flyer was indeed a pretty crappy airplane. But showed that heavier than air flight was possible. Within a few short...

> You can download and install the PiDP-10 software package on a Pi > without the front panel. That will give you some time to learn >...

About 3 hours, but I have a lot of practice soldering and used a really hot iron.

The quality of the PCBs, switches, and molded plastic parts were top notch. I had no trouble with soldering and fitting everything...

How long did it take to build the kit?

You can download and install the PiDP-10 software package on a Pi without the front panel. That will give you some time to learn about...

Very nice. I have all of Oscar's previous creations, but this looks the best so far. I am on Oscar's list for the next shipment - or at...

I recently bought a PiDP-10 from Oscar Vermeulen at: https://obsolescence.wixsite.com/obsolescence/pidp10. He also makes replica...

Just in case someone else might want to play with this, I have uploaded the sturdier version of Hideehoo's case design file and the STL...

I sliced the modified case parts (bottom plate and top case) in PrusaSlicer and overnight attempted a PLA print of the bottom plate with...

I have tried the latest version of Cura, but it no longer runs under Windows 7. Prusa Slicer works fine.

I managed to increase the thickness of the top case and the bottom plate, but Ultimaker Cura is unable slice the STL file: The build...

I have downloaded and installed DesignSpark Mechanical Explorer. The case design file "SBC6120-RBC Front Panel Case.rsdocx" opens nicely...

I actually like the white front panel. :) The only thing I am not 100% happy about are the 3D printed parts I got made in black...

I think you have to be creative even with Windows 10 to prevent it from trying to upgrade you to an unusable machine. I am slowly...