Search results

AS can be seen above in the one photo above, their are a few copies of the "Silicon Software". But "MC68010" has not been seen since Jan 31, 2014, the other one is in Melbourne Au, which I am still trying to get copies of the Eproms

Hello I am looking for someone that has one of these with the Silicon Software Eprom I would like to get copies of the 3 set of Eproms Thanks Tony

I would look at 32 bit linux here is one review site https://itsfoss.com/32-bit-linux-distributions/

You might ask Rosco at https://discord.com/channels/698525682199822367/734899607955570740 he had a display board that used the V9958 and may still have some chips

hello where in california are you located

Looking for a copy of the "MAS68K" assembler

Yes that looks like it Thanks

Hello I am in need of the software for a PC Running either DOS or Early version of Windows I have a HP64700B emulator that I got and am trying to get it working to get a 68000 board running

Hello 336 is a 33 micro-fard cap and it is 16 volts, for the smd package you will need to find same size and the line is the plus side, if one burned ot the other may not last as they dry out and short. so you should them both

Harry, I would look at using the 52 pin version of the 68008 as it supports 4 meg of address space and is in a plcc package which uses less space The kiwi is based on the 68008 https://www.ist-schlau.de/hardware.html And also there is the Katy which is also using the 48 pin version...

You also have mega 68000 https://www.mega-micros.co.uk/

you have the https://rosco-m68k.com/ or https://kswichit.net/68008/68008.htm which the 68008 is sold on ebay

Have you looked at, https://hackaday.io/project/177988-68k-mbc-a-3-ics-68008-homebrew-computer

The web site says Sunday April 16 2023

Want to trade a amiga 2000 for CSA 68000 CPU board

Jameco has these and others https://www.jameco.com/z/GB240-Major-Brands-2764A-EPROM-Grab-Bag-64K-DIP-28-Need-Clean-Erase-10-pcs-_2344503.html

P0 are the data bits connected to thru U2 on the serial board as a buffer, then U2 is feed to the 10 74s373 U1 thru U10 on the display board P2 outputs P2.0 thru P2.3 connects to U11 the 74154 4 to 16 decoder which is connected to the 10 latches (74s373) P2 outputs P2.4 thru P2.6 are connected...

Since I am learning as I go this is code fragments I found on the web and am using as a starting point. I was also playing with some serial port code that will turn on and off segments but not the ones I want any changes with working code would be great

Still working on decoding the led's have 4 7 segment displays counting trying to get the first 8 counting have to figure out how to sent serial data to them here is the try at getting 8 counting, it is having error. 8ACROSS_NEW2.C(182): error C141: syntax error near 'else'

Hello I have this that was working for counting on four 7 segment displays now I am trying to get it working for 8 7 seven segment displays it has this error and I have not been able to fix it. 8ACROSS_NEW2.C(182): error C141: syntax error near 'else' Any help would be great