Search results

If you have any (Industrial Micro Systems International) IMS S-100 boards, I'm interested. :)

That is simultaneously awesome and also terrifying. :D

It works. ;) I didn't have to do anything other than plug in the second serial port on the MPU and I was able to connect to this BBS in Germany that's running on an RC2014.

Based on my experience with old computers, I'm not convinced that this is as clear as you think it is.

Now that I have a fat 'hard drive' on this thing, I spent some time last night loading it up with some software. Wordstar, dBase, TurboPascal, BASCOM, Z80ASM, Infocom games, etc. I want to go through the software in the TurboDOS folder of the Walnut Creek CP/M disc and see if there's anything...

@new_castle_j Do you know if it's possible to 'deconstruct' a REL that's made of other RELs? I'm wondering if there's a way I could remove SPB186 from the MCD740.REL in the interest of saving memory, since I don't have (and probably won't get) a 186 slave. I don't see anything that resembles an...

This was exactly the issue. Changing that jumper 'fixed the glitch'. 190 MB 'hard drive' happily verifying. I think that six 30 MB drives seems to be right for the era, and relatively easy to compartmentalize. Yeah, my goal is to set it up so that you can 'telnet' into a terminal just like...

In addition to the two GOTEK drives that are pretending to be 8" Floppy Drives, I now also have a MFM Emulator Rev D that is currently is pretending to be a 140MB MFM hard drive. Since one of my goals is to set this thing up so that at least one (hopefully more*) of the terminals is accessible...

That looks like it's set up to use the serial port address on the 971 CPU board, which is 2DH. The 442's second port is (I believe) 12H. Having said that, I think I can stick this second 442 in as the secondary IO card and have it sit with it's first serial port at 20H, which one of the...

On the left is a serial connection to the master processor, where I've pulled up a directory and run TPA. On the right is one of the two A862 MPU boards, running Wordstar. The primary processor has about 17k free. When I ran TPA on the slave processor, it had about 51k free. :)

Maybe I'll poke around with the Gotek settings and see if I can get a setting to fix the verify issue, but I'm not really concerned about it. Verify is a lot more important with real media than it is with virtual media. I can lose the CMD files off of the hard drive (I don't have a 16-bit...

Attached. The current setup I'm running is two GOTEKs and a 40 MB MFM drive. The drives are configured in the PAR files for A and B to be the GOTEKs and C through G to be the five 'partitions' (?) on the MFM drive. I have H through P set to 0FF, (0), though I'm not entirely what the benefit of...

That looks just like mine... I'M RICH!!!!

Okay, so I have a working boot floppy that has fixed drives C-G on the hard drive recognized. For reasons I don't really understand, it seems like you don't actually do a high level format of the individual drive letters? FMTW still says the 'Winchester' isn't ready, even though drives C...

Interesting progress today. Still don't have a *bootable* version of 1.41 that's happy with the hard drive, but I did discover that when I remove both DSK401 and DSKFMT8 from the 1.41 build, the floppy disk format utility FMTF works after a manual load. Interestingly, it 'passes' the format...

Yep, though I haven't got beyond just getting the drive low level formatted and using altsec to mark tracks that need to be replaced. There's something up with my stdsingl build when I include the drivers for the 1100. For one thing, the 1100 driver seems to be unhappy with the dsk401 driver...

So FMTWIN will let you enter custom specs for a hard drive. I'm not entirely sure what the "On time" and "Off time" values refer to, though. I'm not sure I've ever come across those before. Having said that, it does seem to have formatted and verified the drive with the settings below without...

Yeah, it's in the PAR for the working builds I have for 1.30 and for 1.41. After I get the minimum builds done, I'll post the GEN and PAR files and you can take a look at them. I think the GEN file for 1.30 is pretty standard. I didn't have a default .GEN file for single user on 1.41, so I...

So I backed up to 1.30 and am working to make sure that I really need the other drivers I pulled in. This latest working version is using: RTC442 ; relative clock driver for IMS 442/640 Board (available in 1.30) (replaces RTCIMS in the .GEN) BRT442O ; baud-rate tables for systems with...

Figured it out. I had the same issue with my first attempt at a loader for 1.30, too. If the .PAR file is unhappy about ANYTHING, it seems like it will still create the loader but the loader will only work from the command line. With both 1.30 and 1.41 there were some references to the 5"...