Search results

Thanks for the excellent assistance.

Now I need to flip one of my 5.25 and 3.25 drives so I have all combinations.

Yes, no soldering needed. Flipping 10 and 12 did it. Thank you. Going to assemble a 3.5 x 2 FD-502 drive set. Looking forward to trying it out. I tested this with FD-500 FD-501 FD-502, all worked. I tested 24pin and 32 pin. Both worked. I did not need to do anything with the DS0, DS1 solder...

I will give that a try and let you know. Thanks, this issue has been bugging me for months.

Thanks everyone for the help. I am going to get these connectors. Looks like the way to go. I am excited to have a 3.5 x 2 for my setup.

I also have a 500, 501, and 502 using a 5.25 and a 3.5 inch drive. However, I want my 3.5 to be Drive 0. I have been working on this for a long time messing with twisting 12,13,14 Removing pins, Trying to solder the jumper on floppy drives. So far no luck. Have you or anyone had luck...

I have tried with the twist and without the twist. The twist that I am using is flipping 12-14. I will check you link. I am going to try and check my soldering on the drive to make sure it is correct.

I can build a 3.5" that runs on drive 1 all day long and it works great on my FD-500, FD-501 and FD-502. With pin changes. However, I can only ever achieve Drive 1 , most software wants Drive 0. So I end up paring the drives with a classic 5.25 drive as Drive 0 and a 3.5 with Drive 1. I have...