Agent Orange
Veteran Member
Need another opinion (or so):
Today I installed a Am5x86-P75 (AMD-5x-133 ADW) in my Gigabyte 486VF mobo. After much jumper switching, I finally got it to crank out 132 MHz, and it seems to run fine. What I'm not sure of is the AT Bus Clock Settings. The CPU is jumpered to the"DX4" setting; i.e. 33 Mhz CPU clock/100 MHz CPU Frequency (the only configuation that will give me 132 MHz).
The mobo's available AT Bus Clock settings are as follows:
* 1/3 CLKIN for 25 MHz System
* 1/4 CLKIN for 33 MHz System
* 1/5 CLKIN for 40 MHz System
* 1/6 CLKIN for 50 MHz System
I'm currently using "1/6 CLKIN". The only reference on this particular cpu is the from the following URL:
http://web.inter.nl.net/hcc/J.Steunebrink/amd5x86.htm
What say you?
Today I installed a Am5x86-P75 (AMD-5x-133 ADW) in my Gigabyte 486VF mobo. After much jumper switching, I finally got it to crank out 132 MHz, and it seems to run fine. What I'm not sure of is the AT Bus Clock Settings. The CPU is jumpered to the"DX4" setting; i.e. 33 Mhz CPU clock/100 MHz CPU Frequency (the only configuation that will give me 132 MHz).
The mobo's available AT Bus Clock settings are as follows:
* 1/3 CLKIN for 25 MHz System
* 1/4 CLKIN for 33 MHz System
* 1/5 CLKIN for 40 MHz System
* 1/6 CLKIN for 50 MHz System
I'm currently using "1/6 CLKIN". The only reference on this particular cpu is the from the following URL:
http://web.inter.nl.net/hcc/J.Steunebrink/amd5x86.htm
What say you?