NobodyIsHere
Veteran Member
- Joined
- Dec 21, 2006
- Messages
- 2,410
Hi,
I am looking for some drive rails for a case I think was manufactured in the 1998 timeframe. It is a "Magictronic" labeled case which housed a PII 450 MHz. I am reusing the case as an external floppy drive enclosure for an S-100 bus system.
The case uses 0.75" wide by about 4" long drive rails with small tabs to secure the drives with a case screw in the front. These drive rails are different that the old "AT style" drive rails common on 1980's AT machines which are about 0.5" wide and 5" long.
If you have any of these drive rails or know where I could get some, please post here or PM me. Thanks!
Andrew Lynch
I am looking for some drive rails for a case I think was manufactured in the 1998 timeframe. It is a "Magictronic" labeled case which housed a PII 450 MHz. I am reusing the case as an external floppy drive enclosure for an S-100 bus system.
The case uses 0.75" wide by about 4" long drive rails with small tabs to secure the drives with a case screw in the front. These drive rails are different that the old "AT style" drive rails common on 1980's AT machines which are about 0.5" wide and 5" long.
If you have any of these drive rails or know where I could get some, please post here or PM me. Thanks!
Andrew Lynch