harry
Experienced Member
[
Measuring the value directly on the resistor (without soldering it out) is 56Ohm (in both directions). Not sure if there are other effects from surrounding components, but as there is D752 directly in the path, and both directions are the same, this could very well be the correct value.
André[/QUOTE]
Hi Andre, It has been quite some time now since I made the repair on the 8296 screen pcb, I took the advice and help from the vcf, and used a 68 ohm resistor, the screen is now working fine, but thanks for your interest and pictures.. ......Harry
Measuring the value directly on the resistor (without soldering it out) is 56Ohm (in both directions). Not sure if there are other effects from surrounding components, but as there is D752 directly in the path, and both directions are the same, this could very well be the correct value.
André[/QUOTE]
Hi Andre, It has been quite some time now since I made the repair on the 8296 screen pcb, I took the advice and help from the vcf, and used a 68 ohm resistor, the screen is now working fine, but thanks for your interest and pictures.. ......Harry