NeXT
Veteran Member
Noticed that the card location sheet on my system is outdated. It does not have an RL02 controller in it now and it didn't have one when I got it.
I'm able to identify and mark down all but two boards. Both are from Emulex.
One is a quad width unibus marked TC1210201-FSG on a sticker and TU1210401 on the PCB. Google says it's a SCSI card but I own an Emulex SCSI card and it certainly does not look the same or at least this ine is missing six LSI chips. This was a pertec tape controller, right? The system came with at least one Pertec 9-track drive.
the other board is hex-width unibus and is marked CS1110201-H2L and CU1110401 on the PCB. I think I was once told it was a multiport serial board but again, I don't remember.
I'm able to identify and mark down all but two boards. Both are from Emulex.
One is a quad width unibus marked TC1210201-FSG on a sticker and TU1210401 on the PCB. Google says it's a SCSI card but I own an Emulex SCSI card and it certainly does not look the same or at least this ine is missing six LSI chips. This was a pertec tape controller, right? The system came with at least one Pertec 9-track drive.
the other board is hex-width unibus and is marked CS1110201-H2L and CU1110401 on the PCB. I think I was once told it was a multiport serial board but again, I don't remember.