Looking for SWTPc 6800 MP-S compatible BASIC

[billdeg]

The Flex user group files are no longer available on the web? Does anyone have a papertape image of an 8K BASIC (S1 load image) that is compatible with the MP-S serial card (set to 110b) and Mikibug (swtbug?)

It seems like a lot of papertape programs assume you're using the MP-C serial card (no ACIA).

(for example this BASIC requires the MP-C card http://www.swtpc.com/mholley/NewsLetter1/MicroBasic.htm)

Thanks

Bill

 

[billdeg]

I found one TSC Micro BASIC Plus on swtpc.com. The only problem is that I have to enter the code one instruction at a time into the teletype. I'll punch a tape so I don"t have to repeat the experience 2x. I will also have to edit code. It has a few rouimes that blare not mp-s compatible.
Bd

 

[billdeg]

It took more than three hours entering in almost 4Kb worth of 2-digit HEX
instructions into my teletype, and a good 20 minutes or so to punch a tape,
but I was successfully able to save TSC BASIC on my SWPTc 6800 to
papertape. Worked the first time.
http://www.swtpc.com/mho...asic/TSC_MicroBasic.htm