I am looking for some PC memory for my 915pm/915gm/915gvm/910glm series MSI motherboard (Manual doesn't say which is the model I bought, seller described it as 915gm...) Hopefully, this will be all that is required to get my system back up and running that has been in repair for 7 months (Takes me a while to save up for stuff!) Crucial's wizard isn't working for me (No drop down menus) and I don't have a specific model anyway.
This is what I got from the manual:
Supports two 64-bit wide DDR data channels
Availiable bandwith up to 3.2GB/s (DDR 400) for single channel mode and 6.4 GB/s (DDR 400) for dual-channel mode
Supports 128mb, 256mb,or 512mb DDR technologies
Supports only x8, x16 DDR devices with 2-bank
Later in the manual
Install at least one DIMM module in the slots. You can install either double- or single-sided modules to suit your own needs.
In the motherboard itself the slots are marked with 2.5v
I hope this is enough. I am looking for a combination of 1 or 2 modules, with total memory or 1-2GB, but not exceeding, and it must fit the system described above. Could I be any more specific
The above about mempry, and the whole memory system makes no sense to me whatsoever. I just hoped that the motherboard I got would support all my existing memory. Guess I was unlucky! It didn't physically fit. It was the right length, but the middle notch was a little out. Could someone please tell me a sensible price to pay, a link to where I can get some or offer me some themselves?
To trade I have the memory from my system that doesn't fit the new motherboard, two sticks of 512mb, both marked with the following sticker:
512MB 1Rx8 PC2-400U-444-12-DO
512MB, DDR2, 533, C14
I want to get this finished and out of the way as it's really starting to get me down, annoyed, fidgety and sad The base units been sat in the corner for ages.
This is what I got from the manual:
Supports two 64-bit wide DDR data channels
Availiable bandwith up to 3.2GB/s (DDR 400) for single channel mode and 6.4 GB/s (DDR 400) for dual-channel mode
Supports 128mb, 256mb,or 512mb DDR technologies
Supports only x8, x16 DDR devices with 2-bank
Later in the manual
Install at least one DIMM module in the slots. You can install either double- or single-sided modules to suit your own needs.
In the motherboard itself the slots are marked with 2.5v
I hope this is enough. I am looking for a combination of 1 or 2 modules, with total memory or 1-2GB, but not exceeding, and it must fit the system described above. Could I be any more specific
The above about mempry, and the whole memory system makes no sense to me whatsoever. I just hoped that the motherboard I got would support all my existing memory. Guess I was unlucky! It didn't physically fit. It was the right length, but the middle notch was a little out. Could someone please tell me a sensible price to pay, a link to where I can get some or offer me some themselves?
To trade I have the memory from my system that doesn't fit the new motherboard, two sticks of 512mb, both marked with the following sticker:
512MB 1Rx8 PC2-400U-444-12-DO
512MB, DDR2, 533, C14
I want to get this finished and out of the way as it's really starting to get me down, annoyed, fidgety and sad The base units been sat in the corner for ages.