Reset switch reference on Macintosh Classic.

[N3rd]

Hi everyone,
I am currently trying to save a Macintosh Classic logic board. I need to replace the two reset switches (the part 6 on the linked picture) on it. Does someone can tell me the reference of these or a link where I can buy new ones.
Thank you for your help.

 

[GiGaBiTe]

They're some sort of right angle tactile switch. I don't know the dimensions of the switch, but this one looks close:

https://www.mouser.com/ProductDetail/Diptronics/DTSA-61K-V?qs=MLItCLRbWswWOCNnuQkEkQ==

 

[maxtherabbit]

Before you replace them try bathing them in deoxit and then working the switch a bunch of times to clean the contacts inside. I was able to save mine that way

 

[N3rd]

GiGaBiTe Yes, Thank you. Thanks to you I have found a good reference https://www.mouser.fr/ProductDetail/Diptronics/DTSA-25R-V?qs=MLItCLRbWsw1CtZh7Naw%2Bg==. This is the same as the one you have posted but with a length of 12mm.
maxtherabbit Good advice ! Thank you.

 

[BlueScore]

Here is an exact match I found for the switch on mouser. Matches the physical dimensions along with the activation force. You can reuse the existing right angle bracket.

https://www.mouser.com/ProductDetail/688-SKHCBFA010