zenith zcm-1450-ut

[linemanduke]

i need to know if this monitor is a cga and if so where to get a cable

 

[kb2syd]

My sources say it is:
SVGA monitor, 1024 X 768, 30-60 KHZ Horizontal, 48-90 HZ Verticle

Doesn't sound CGA to me.

 

[linemanduke]

weird has a nine pin male iirc plug non the back

 

[kb2syd]

I have a couple of VGA monitors with 9 pin plugs. One is a Multisync II (ok, so it is more than VGA), one is a weird vga I picked up surplus from Arkansas Senior Services. This is a strange machine by itself. Has PS/2 style ports, made by IBM, but only the keyboard that came with it works with it. Any other keyboard and it fails POST.

 

[modem7]

The pinouts for both 15-pin and 9-pin VGA are shown at http://www.interfacebus.com/Design_VGA_PinOuts.html

Adaptors can be found on the Internet. For example, the one at http://www.stsi.biz/vid-a-9m-15f.html would then allow the use of a standard '15-pin to 15-pin VGA cable'.

 

[Druid6900]

Seems to me that, somewhere around here, I have a 9-pin male to 15-pin male video cable. I think it's in this room even.

Hang on........ (sounds of thrashing around and stuff falling over)

Yes, here it is. (Holds up 48" video cable with snazzy thumb-screws at both ends and chokes molded into both ends).

See?

Would something like this do?

 

[linemanduke]

well
i only need the monitor if its cga so back to thne thrifty mart (my mother has a 1 crt f each type: limit) and i already have my ibm 8513.