• Please review our updated Terms and Rules here
  • From now on we will require that a prefix is set for any items in the sales area. We have created regions and locations for this. We also require that you select a delivery option before posting your listing. This will hopefully help us streamline the things that get listed for sales here and help local people better advertise their items, especially for local only sales. New sales rules are also coming, so stay tuned.

Wanted - MALE "edge" connector

g4ugm

g4ugm

Veteran Member
Joined
Feb 22, 2011
Messages
3,043
Location
NorthWest England (East Pondia)
Folks,
I want to make an extender card for my EAI TR-10. Whilst I can bodge up a connector, it would be real nice to get hold of a puka plug. Its a CARDCON 22/44 way MALE connector. The best picture I found is the one here:-

http://en.wikipedia.org/wiki/PDP-1#mediaviewer/File:Dec_SYSTEM_BUILDING_BLOCKS_1103.jpg

of a PDP-1 building block. If any one has any I will pay a reasonable price (and goodness knows what that is) for one.

Thanks in Advance.
 
The only unusual edge connector I have is this:

P4200140.jpg

It's a 34 pin dual edge for connecting/extending two 34 conductor ribbon cables, e.g., floppy drive or hard drive control cable.
 
That sort of thing would do, but I need 22/44 ways. I have found that the Tandy / RadioShack 276-187 will do, but I only seem to have one of those. More would be nice....
 
You could always draw one up in a CAD program and send the Gerbers off to a board house like Sitopway (Chinese). You could probably get 20-30 of them for under $50 US, with about a two-week turnaround time.
 
Thanks for that suggestion. I was thinking of a PCB FAB lab for the extender card, but of course I only priced the UK ones. I have built an extender card using the one Tandy card I found in my spares drawer. I hadn't thought of the Chinese places, but they spam me often enough, spo might b worth a try. I have the board in DesignSpark as I tried making on myself, but my PCB is old and has dird...
 
g4ugm said:
Folks,
I want to make an extender card for my EAI TR-10. Whilst I can bodge up a connector, it would be real nice to get hold of a puka plug. Its a CARDCON 22/44 way MALE connector. The best picture I found is the one here:-

http://en.wikipedia.org/wiki/PDP-1#mediaviewer/File:Dec_SYSTEM_BUILDING_BLOCKS_1103.jpg

of a PDP-1 building block. If any one has any I will pay a reasonable price (and goodness knows what that is) for one.

Thanks in Advance.
Click to expand...

https://www.gearslutz.com/board/gee...-amphenol-amp-wpi-connectors-80xx-series.html
 
You must log in or register to reply here.
Back
Top