KLund1's latest activity

I am such a dope!! I had SW1-1 ON !!! NO floppy attached to system !!!! I switched to off and the DTK card is good. !! In fact I...

Modem7, I did not get the bios message when JP5 was open. Perhaps I was unclear in my previous post, sorry. Chuck(G) I'll pull the...

Chuck(G) Thanks I made a small but important typo. The FD is a Teac FD-55BV not BR. This is a 360Kb drive. It too has many jumpers, but...

I have this card https://stason.org/TULARC/pc/io-cards/C-D/DTK-COMPUTER-INC-Floppy-drive-controller-PII-151B.html and a IBM 5150...

Hi, Odd question but I seem to have an IBM Model M Keyboard Part Number 1394204. This is terminal keyboard. It has an five wires in...

E2 !! Jumper was missing! All Good Now. 640Kb !!! I looked over minuszerodegrees pages about jumper settings for 5160 MB. The info...

Here you can double check I have the right ram in the right banks. perhaps dyslectics kicked in...

Seems to pass all ram tests. I think the video card switch set wrong but still works.

modem7 Q1 This a just acquired board. Q2 Yes, and already have supersoft for XT, one made by landmark, other burned by me a few years...

Good thought ! Checking ,,,, They are the 05/09/86 ROM's. That is last version from IBM. They look original to the board. These should...

Thanks for the very quick reply. No I did not do that mod. It should not be necessary for this board. That mod is for the 64-256 XT...

I have a IBM 5160 256-640 KB motherboard. (the brown one) It is showing 1/4 the installed ram. I have just the board with 1 row in bank...

Thanks everyone !! I know much more about these then before ! I did some more digging on digikey and found the X1,X2,Y1,Y2 options in...

Thanks for the replies! I understand, but I like to put things back that I take out. My upbringing I suppose. So my question still...