silvervest
Member
Hey all,
I'm mid process fixing a T1000SE after recapping and trace repair from leaks, it's still not starting up. Power switch clicks on for a second (draws ~100mA), some LEDs light, backlight kicks in, then the power circuit drops out assumedly due to one or more of the power rails not coming up correctly.
My problem is that I can't find any schematics for this, and there's no real markings for test points etc on the mainboard, so while I can test the obvious 5V rail and see that's working I don't know where to test the other rails to see where the problem could be. Basically flying blind...
Does anyone have any knowledge on this power circuitry, or maybe even have one of these available that they could take apart and mark out some probe points for the various rails?
Cheers!
I'm mid process fixing a T1000SE after recapping and trace repair from leaks, it's still not starting up. Power switch clicks on for a second (draws ~100mA), some LEDs light, backlight kicks in, then the power circuit drops out assumedly due to one or more of the power rails not coming up correctly.
My problem is that I can't find any schematics for this, and there's no real markings for test points etc on the mainboard, so while I can test the obvious 5V rail and see that's working I don't know where to test the other rails to see where the problem could be. Basically flying blind...
Does anyone have any knowledge on this power circuitry, or maybe even have one of these available that they could take apart and mark out some probe points for the various rails?
Cheers!