sombunall
Experienced Member
After feeling the heat of a voltage regulator and some metal can transistors on the underside of my 10 meg drive I wanted cooling while I exercise my MFM drive collection. I came up with this. It uses an epson 5 1/4" adapter for 3.5" drives with no front (any floppy adapter would have worked but I don't have many metal ones), meccano and 92mm fan with nuts/screws. I know the airflow isn't so good with only a 5mm space below the fan but it seems to work well enough. If was going to get serious I could cut a hole in the bottom and use longer meccano with right angled feet. No new holes were drilled to make this.