KhanTyranitar
Member
Figured this is as good a place as any go see what someone might know or have suggestions on.
What I e got is a no activity condition. I can power it on, and the power light and caps and fn LEDs light up. No other lights come on or blink and it never boots, not even to BIOS. I’ve checked for 5v and 12v power, both seem fine. I tried replacing the CMOS battery that didn’t help. When I got it it had two of the larger caps blown and leaking. I’ve cleaned up the board, replaced those two caps plus another, I found all the traces test good. The corrosion from the caps was only superficial and cleaned up easily.
I’m open to ideas.
What I e got is a no activity condition. I can power it on, and the power light and caps and fn LEDs light up. No other lights come on or blink and it never boots, not even to BIOS. I’ve checked for 5v and 12v power, both seem fine. I tried replacing the CMOS battery that didn’t help. When I got it it had two of the larger caps blown and leaking. I’ve cleaned up the board, replaced those two caps plus another, I found all the traces test good. The corrosion from the caps was only superficial and cleaned up easily.
I’m open to ideas.
