will
Member
I have a couple old-style game paddles with the IC type connector. I'd like to use them with the db-9 port on my 2e. Any advice on how to do that?
Will
Will
I've made some adapters recently. Not too difficult if you don't mind a bit of soldering. I purchased a DB-9 connector and a 16 pin IC socket from radioshack (you can mail order these from an electronic parts online store as well like Jameco). Then using some small guage wire, I wired the connections on the pins underneath the IC socket to the DB-9 connector. Works like a charm. Just plug your old style paddels into the IC socket. The pinouts for the DB-9 and the old 16 pin are easily found by searching the net. The apple FAQs have them, as well as, the actual reference manuals for the ][+ and //e.
You can put as much time as you want on the finsihing touches to make it look more "commercial". I usually use tape and epoxy to cover the connections and created more rugged connectors.
Great, thanks, I'll try it. I haven't done any soldering since high school, but I suppose it shouldn't be too hard.
Do you happen to know if it's possible to open the case on the old paddles? I'm sure the contacts will need cleaning.
Will