Epson PF-10 Disk Utilities

[Alfred Werner]

When I bought my PF-10 disk drive (for use with the PX-8 Geneva computer), it came with a disk with 9 disk utilities. I don't have that disk anymore and I am wondering if any Forum member that uses the PX-8/PF-10 still does. I would be glad to provide a blank disk and a stamped envelope with my address on it, if somebody could help me with this.

Many thanks

Hello Charles,
i just found your posts here.
Did you manage to get your PF-10 working (load / save / etc.)

Would be glad to hear if you got a Disk to combine PX-8 with the PF-10 because i have that problem.
Thanks for now

Best regards

Werner

 

[alank2]

Here is the copydisk.com that I have.

 

[Alfred Werner]

Hallo Alenk2,

thanks for the copydisk
But i am desperate now.... i tried so many variations to get the copydisk to my PX-8 but no success.

I have an Old Dos Notebook and managed to solder a transmission cable from the PX-8 (8 Pin) to the COM1 (SUB D9) to the Notebook
Then i tried many different options / Term / Flink / Basic but so far could get no connection.

The Notebook gives Timeout Errors and the PX-8 reports / FD Error / RS232 not ready and so on.

May be you have a suggestion how i should setup a connection

Thanks

Best regards



Werber

 

[alank2]

I wish I could; I've never tried serial transfer with the PX-8. Hopefully someone else will come along and give some help!

 

[Alfred Werner]

Hello again...
and thanks for the reply

may i am completely trying the wrong way....

Do you have a PX-8 and a PF10?

Do you have a way to "send" files ("copydisk.com" for example) from a DOS / Win PC to a PX-8 (or PX-4) ?

somehow i got stuck

the only posive result was, that my serial cable worked with LL3 from one PC to another PC

Best regards

Werner

 

[mk2s]

I repaired a PF-10 last year. Did the OP get what they were looking for? Werner did you get what you need?