Chuck(G)
25k Member
- Delivery Options
- In Country Shipping or Local Pickup
I've got a bunch of the small HP Vectra PSUs, from the P1 through the P3 varieties. About half the size of a normal PSU, so not common. PM if interested and need specifics.
. Vectra P1 PSU. 6" W x 5½" D x 3¼" H; Minebea Electronics, 160W,
HP Part No. 0950-2998; 5x4 pin Molex +1 4pin 3.5" drive connector
13 pin Molex single-row (PS1), 6 pin Molex single-row (PS2)
+5/20A, +12/4.4A, +3.3/12A, -12/0.5A -5/0.2A
Power receptacle is on the 6x3½" side
2. Vectra P2 PSU. 6" W x 4" D x 3¼" H; Delta DPS 16GB, 160W,
HP Part No. 0950-3623, 5x4 pin Molex + 1 4 pin 3.5" drive connector
20 pin ATX connector + 4 pin fan sensor
+5/16A +3.3/16A +12/4A +5VSB/1.5A -12/0.5A -5/0.3A
Power receptacle on the 6x3½" side
3. Vectra VL P3 PSU. 4" W x 5½" D x 3¼" H; Delta DPS 125EB, 120W,
HP Part No. 0950-3708, 4x4 pin Molex + 1 4 pin 3.5" drive connector
20 pin ATX connector + 3 pin fan sensor +4pin for battery backup
+5/15A +3.3/8A +12/4A +5VS/2A -12/0.5A -5/0.3A
Power receptacle on the 4x3½" side
4. Vectra VL P3 PSU. 4" W x 5½" D x 3¼" H; Delta DPS 125EB, 120W,
HP Part No. 843032, 4x4 pin Molex + 1 4 pin 3.5" drive connector
20 pin ATX connector + 3 pin fan sensor +4pin for battery backup
+5/15A +3.3/8A +12/4A +5VS/2A -12/0.5A -5/0.3A
Power receptacle on the 4x3½" side