schuylem
New Member
So...this is what I have, and I'm looking to sell it to someone to give it a good home. Preferably, I'd like to find a museum that wants it:
IMSAI 8080,microcomputer, circa 1976
Including
28 amp power supply, enclosure, front panel, and the following:
1. IMSAI 8080A cpu board,
2. Processor Technology CUTS cassette interface board
3. Processor Technology GPM general purpose module with CUTER and ALS8
software in ROM
4. Processor Technology VDM 1 video board (with an intermittent cold solder
joint)
5. Processor Technology 3P+S interface board (parallel and serial ports, with an
intermittent cold solder joint)
6. two Ithaca Audio 8kbyte static RAM memory boards
7. ELI S-100 prototyping board with plug socket surface
8. Texas Instruments Silent 700 keyboard set up to operate with 3P+S board and
CUTER
9. Microsoft InPort board
10. Homebrew ADC/DAC board
Full documentation for all items, including circuit diagrams (original factory manuals is most cases).
System is operational as configured presently. The intermittent cold solder joints are troublesome but do not prevent use.
I'll likely try eBay, but I've been a lurker here for years and thought I'd see if there is interest here.
IMSAI 8080,microcomputer, circa 1976
Including
28 amp power supply, enclosure, front panel, and the following:
1. IMSAI 8080A cpu board,
2. Processor Technology CUTS cassette interface board
3. Processor Technology GPM general purpose module with CUTER and ALS8
software in ROM
4. Processor Technology VDM 1 video board (with an intermittent cold solder
joint)
5. Processor Technology 3P+S interface board (parallel and serial ports, with an
intermittent cold solder joint)
6. two Ithaca Audio 8kbyte static RAM memory boards
7. ELI S-100 prototyping board with plug socket surface
8. Texas Instruments Silent 700 keyboard set up to operate with 3P+S board and
CUTER
9. Microsoft InPort board
10. Homebrew ADC/DAC board
Full documentation for all items, including circuit diagrams (original factory manuals is most cases).
System is operational as configured presently. The intermittent cold solder joints are troublesome but do not prevent use.
I'll likely try eBay, but I've been a lurker here for years and thought I'd see if there is interest here.