Ok, my Gotek arrived and it already has the latest FlashFloppy installed. Had a few issues using the USB stick I had selected. I think it was due to it was formatted for Linux use and not formatted FAT32. Finally fixed that. One other USB stick I had would not allow me to format and I stuck it back on the shelf not sure why. I finally got some files on my USB for use with the Kaypro. One image being the basic boot disk for 2.2g. And a few games and Kermit. About 6 or 8 total. With having the drive as A and SR0 jumpered it will not boot the basic CP/M nor anything else. The files show up on the tiny LED display fine so I know the Gotek is working. I can turn the knob and select others. So I moved it to B and jumpered SR1. Now I can do a DIR of B and most work fine. One of the games images reports "No Files". And one other does too. The base CP/M disk reads just fine and I can run stuff on it from B. So the Gotek works well as B. Put it back to A and same issue. I don't know what I must be doing wrong, but it just sits at the "Install boot disk prompt". Any ideas? I fiddles with many FF.CFG and IMG.CFG changes. Nothing helped. My boot ROM is a 81-292. The system works fine with the 2 floppies.