• Please review our updated Terms and Rules here

Motorola Exorciser etc

woodchips

Experienced Member
Joined
Nov 4, 2012
Messages
423
Location
UK
More thinning out needed, and the Exorciser has risen to the top of the pile.

This is an Exorciser that I made from the circuits, no Motorola bits in it at all. There is one board with the CPU, memory, ports etc and another board with the floppy controller. Both boards are speedwire. Circuits are exactly as in the Motorola manuals except that 64K DRAMs and similar used.

Comes with a new and near unused DRI SS floppy plus lots of discs.

There is the MDOS and other manuals. Some CW software on paper tape and cassette.

There is a DEC VT520 and Wyse VDUs, also some mono monitors for the 6809.

Also included are several, four I think, custom military 6809 computers with an 8" floppy, video etc etc. These are really whizz things, I was going to get them running but never found the time.

It is going to take some time to find everything, I also need to get the Exorciser running to delete all the discs with my files on them. Basically everything I have will be going.

What sort of interest is there? Not free, can't afford that now, just ends up on ebay two days later. If interest then I will do a full inventory, and also get the Exorciser running, otherwise it is all scrap.
 
Uh DEC VT520 is a good, however I think about custom military 6809 computers with an 8 floppy, video and more
 
Back
Top