Hi All;
I have about 45 wires to go and the fifth section will be done..
Five sections are basically done.. The reason I say basically is that I already have planned on some needed additions, But, first I will get the unit to work before I make any changes.. One I will be adding some 555 timers and extra sockets to make it so I can wire up those 555's to any signal pin..
Here are some pictures of the progress so far..
Section six is being wired up..
OK, I'm down to my last 18 wires.. Then I know that from last night, I have four signals to fix and not counting if I find any more on what I have wired today..
But, it's getting close..
It's All wired and Tested now to wire the Backplane and see that I have that all wired correctly to put power and ground in the right places on the Backplane..
I have the MACT Tester plugged into the middle two rows, and it is showing that FJ2 is grounded, and so I am looking for the reason why..
I looked in BitSavers and that pin IS Grounded, I will try to unground it next week, I have scraped away the ground on FJ2 on another Row, so it will take more effort by me..
I got about 1 / 3 of the middle two rows wired together of the Backplane..
The module is a DD11-CK..
THANK YOU Marty