Siemens SINIX installation on an German MX300 NSC / intel system

[fritzeflink]

Sinix is based on Xenix , see https://en.wikipedia.org/wiki/SINIX

Here I have logged 2 videos during the installation of Siemens Sinix on a MX300-10 (NSC) and -45(intel) machine.
This -10/-45 has an interchangeable CPU Board so I had to swap the CPU board and connect to an other hard disk.
The videos are in a faster speed for less time to view.

NSC CPU

http://www.myoldc.info/aufheben/MX300-10(nsc)_install_5.21_full.zip

intel CPU

http://www.myoldc.info/aufheben/MX300-45(intel)_install_5.41D20_full.zip

 

[fritzeflink]

I added a video about the installation and boot of SINIX on a Siemens / Nixdorf PC-MX2 system.

SINIX on MX2

 

[fritzeflink]

siemens - mx-rm - PC-MX2

 

[tingo]

Ah, we ran SINIX on RM-200, RM-400 and RM-600 back in the day.