mrthreeplates
Experienced Member
- Joined
- Jul 22, 2018
- Messages
- 77
Hi,
Has anyone had good luck with replacing the power switches on their model 1 or Expansion interface?
I've used these:
The one I got for my EI has worked great (so far).
Unfortunately, I've gotten two for my Model 1 and they both have the same issue. The button sticks/catches internally, occasionally to the point where it gets completely jammed. It feels as if the plunger is getting caught up on the switch contacts (based upon taking a broken one apart). The original switch I replaced (although failed), was completely smooth.
If anyone knows of a different source for these switches, I'd like to try another brand.
Thanks!
George
Has anyone had good luck with replacing the power switches on their model 1 or Expansion interface?
I've used these:
F4UEE C&K | Switches | DigiKey
Order today, ships today. F4UEE – Pushbutton Switch 4PDT Standard Through Hole, Right Angle from C&K. Pricing and Availability on millions of electronic components from Digi-Key Electronics.
www.digikey.com
The one I got for my EI has worked great (so far).
Unfortunately, I've gotten two for my Model 1 and they both have the same issue. The button sticks/catches internally, occasionally to the point where it gets completely jammed. It feels as if the plunger is getting caught up on the switch contacts (based upon taking a broken one apart). The original switch I replaced (although failed), was completely smooth.
If anyone knows of a different source for these switches, I'd like to try another brand.
Thanks!
George