J Jay Newirth Experienced Member Joined Mar 17, 2016 Messages 231 Location Pikesville, Maryland Apr 21, 2019 #1 Has anyone other experienced this boot up screen?
S Stone 10k Member Joined Nov 3, 2009 Messages 12,814 Location South Jersey, USA Apr 21, 2019 #2 If the error message were readable it would be more helpful.
M MikeModifed Veteran Member Joined Jan 5, 2011 Messages 791 Location Portland, Oregon Apr 21, 2019 #3 ERROR: THIS FREHD.ROM CAN ONLY BE USE IN A MODEL I PLEASE CHECK THE SD-CARD AND REPLACE Click to expand... A problem with the Quinnterface? Mike
ERROR: THIS FREHD.ROM CAN ONLY BE USE IN A MODEL I PLEASE CHECK THE SD-CARD AND REPLACE Click to expand... A problem with the Quinnterface? Mike
J Jay Newirth Experienced Member Joined Mar 17, 2016 Messages 231 Location Pikesville, Maryland Apr 22, 2019 #4 Shut it down .... waited a few minutes ... then powered up again and this is what I got
T TRS-Ian Veteran Member Joined Sep 10, 2011 Messages 1,036 Location Melbourne, Australia Apr 22, 2019 #5 Make sure the bus connector on the motherboard is nice and clean. If it has oxide on it then poor connections confuse FreHD/QI. Use a pink pearl eraser to clean them up nicely (on both sides) and it should run more predictably. Hope this helps, Ian.
Make sure the bus connector on the motherboard is nice and clean. If it has oxide on it then poor connections confuse FreHD/QI. Use a pink pearl eraser to clean them up nicely (on both sides) and it should run more predictably. Hope this helps, Ian.