hargle
Veteran Member
If your email field says "-contacted-" then you should add yourself to the bottom of the list again, otherwise you can change the columns for your order anytime and I'll get to you when I get to you.
Please respond so we can get an idea of how many cards we will need to come up with when we are ready to offer the final product.
No dates have been finalized, but answer this question as if it were to be released by Christmas.
Edit: Here is the wiki page on the card.
I just added myself to the spreadsheet for a single XT IDE DIY kit and Keyboard Converter. Are there enough parts left in stock or will I have to wait for the next run?
the dips are not socketed. I think this is the 2nd person I've shorted a 14 and added a 16, which is most certainly going to cause trouble for the people who need 16's and get 14s. sorry in advance.I was short a 14 pin socket, and instead had a 16 pin socket.
I presume that the 16-pin socket may have been for the DIP switches, but I soldered them in directly. The 14 pin I probably could have subbed out of my spare parts, but I just removed the two end connectors of this one and used it instead.
I am missing an LS245 in the parts. I'll have to check to see if I've got some spares I can use for that. Otherwise, it looks really good. I've got everything soldered onto the board... took me about 45 minutes or so do do it all. We'll see how well I did once I put the 245 in.
wow, that's REALLY bad of me. I'm very sorry about that-must have been one of those "get a phone call in the middle of the kitting process" events.
If you can't find a 245, let me know and I will send out a replacement immediately.
Also, apologies to AC for shorting him the cap. wow. three mistakes in 2 posts, in a row. I'm shamed.
And for what it's worth: I for one am not in a hurry to receive my kit. If it takes a bit longer to get the deliveries right, that's okay.
(Oops, maybe I shouldn't have said that too loudly... :stupid: )
I agree that you shouldn't be so hard on yourself, IMHO you are doing a bangup job!... wow. three mistakes in 2 posts, in a row. I'm shamed. ...
wow, that's REALLY bad of me. I'm very sorry about that-must have been one of those "get a phone call in the middle of the kitting process" events.
If you can't find a 245, let me know and I will send out a replacement immediately.