1944GPW's latest activity

Yeah, I guess I hadn't tried this monitor since we got the RAM issue sorted.. Check this out! I'll go through the rest of that...

I had one of those for quite a while and that matches my recollection of the arrangement. I might also still have prints. Amusingly, I...

That cam repair is an easy fix. The greatest difficulty is overcoming the idea that glue alone is enough to hold together a part that is...

Wait..... You can compile things, and do stuff with an 11/03? My first pdp11 was an 11/03 with 28kw of memory, 2 RX01 floppies and...

Here is PDP-8 paradise - Hideehoo's FP6120/SBC6120-RBC on top of Oscar's PiDP-8/i on top of Spare Time Gizmos SBC6120 on top of a real...

I got around to trying the iron-on decal onto a piece of very smooth finished ply. I had the iron on the hottest setting, no steam and...

Actually the RKV11 print set is there in the last three photos and I can't edit my above post. My sincere apology!

For me the finish on the wood would play a part in the choice of application. Screen printing would be good but for line detail that...

Looking at this RKV11 offering, the print set shown appears to be for the RXV11 rather than the RKV11 unit itself. So I guess that the...

An interesting device as it apparently uses (just) 3/4th of the Unibus controller implementation plus a variant M7269 bus control...

The same seller has an RKV11 for >2k USD (about a quarter million Oz Dollarydoos) which I would be interested in, but I'm a bit hesitant...

Apart from the cost, there's probably more on that 60 USD waxed lacing spool than you'd need. I'd try experimenting with making some...

Ya, I removed them along with a bunch of the wiring. At first I was going to try to keep it intact, but the more I looked at it, it was...

They look like regular Winchester MRAC75P connectors. The body parts and shells for MRACs are easy enough to find on eBay but it's the...

Don't know about that book, but this one sure is informative: HOW IT WORKS... THE COMPUTER