Search results

200$ Neg. on offer, a 1987 Compaq Laptop 386/20 with the carrier "Compaq" bag! the system runs, floppy doesn't read/write, it has a type 45 Hard drive in it (untested) and comes with diskettes, a manual and a two-button MS serial mouse. There is a small "glitch on the monitor top center" I am...

I have someone asked me to get a pair of PET systems back to functionality, one is a 8032 Series easy enough to identify as seen in the picture, next to it is like a Pet2001 but with no cassette next to the keyboard, and as seen in the picture it like 1/2 the size of the 8032 model Does anyone...

Someone asked me to see if I could get this vintage Apple II (or IIe not sure) clone labelled "Polisher" he said in a joke ", perhaps it is a Polish-made system" I told him I would find out if possible where that label came from Has anyone seen this before? goggling "apple II polisher" only...

So I have a Tandy 4000 *386DX16 system, but when it tries to boot from a floppy it throws a memory parity interrupt 0bbc:006d" error I swapped out various ram sticks, but all of them gave me the same message. Does anyone have a working tandy 4000 could you tell me what ram sticks they are using?

I have read the past posts on the subject but unfortunately the links are so old that nothing is findable. searched also archive.org but only have the manual for model 804 if someone has a PDF copy of the Digelec Model 824 eeprom programmer , I would appreciate a quick link please.

I have this device that works.. v1.1 Disk extended basic cartridge for Tandy Coco computers I would like to know if anyone knows if there is a 3d printer STL to make a cartridge box for it. ? thanks Patrick

FOR SALE: KAPRO BAG: 150$ +Ship I am offering a Kapro Bag here are the pictures (the box shows only to hold the shape of the bag). No rips and the zippers are in fair condition. Please get in touch with me by email please for the fastest response TexasTandyRestorations@gmail.com or IM me here.

So I have a tandy 4000 EGA card and CM8 (more on that later) At first, all I got out of this setup was a white blank screen on the CM8. so I pulled the EGA card and used a restored working Cm5 instead and tested those two on a Tandy 1000 to ensure they work so I put my tested tandy EGA/CGA...

So I opened this Kaypro 2/84 (discovered it was by board images on https://retrocmp.de/kaypro/kay-p2_hrdw.htm#mb-284 and quickly realized the A: drive doesn't "spin at all, so I took it out and made drive B: as drive A: (yes I changed the jumper to DS0) and I get a "cannot read your diskette"...

For Sale: Kaypro 10 HDD Asking 200$ Working floppy and hard drive, replaced Bad 81-302B Rom for 81-302C, changed HDD for another TM502, and reinstalled CPM 2.2H on it. All good to go now all working on the unit. [>> SHIPPING <<] I prefer Pick up in Houston or would meet halfway to Austin or...

I have this board below and it seems to have a slot 1 and a socket 7, I am assuming it is a 486/586 Motherboard based on the Bios alone. I have searched visually on Total Hardware 1999 website https://th99.infania.net/ and could not identify the board from its characteristics 4xPCI, 4x ISA...

**TTR OFFERS FOR SALE: Asking Price $100 USD ** Tandy Color Computer 2, model 26-3134. As seen in the pictures the working joystick and cassette cable are included. **NOTE:** The television is **NOT** included, nor is the wiring from Coco to the TV. **[>> UPGRADES <<]** Replace the 16K RAM...

CoCo2 - Upgraded from 16K to 64K, one last question So I got My 26-3134 Coco2 with 16k yesterday and of I course changed the Ram from the 4517's for 4164 and a jumper on J1 soldered in and voila 64K Coco2 but Still "Colour basic 1.2" with an empty ext basic ROM slot. Now the Manual does...

TTR OFFERS FOR SALE: Asking Price 250$USD Tandy 100SX with 640K of RAM, 1x 360K Floppy drive, a box of diskettes and a Tandy 1000 Keyboard (enter key sticks a little) NOTE: the Monitor is NOT included, only to show the working condition [>> UPGRADES <<] CPU Upgraded from 8088 to V20 Added MFM...

The lesson I learned yesterday The situation I find myself in is simple, I need to low-level format two MFM drives, and the solution seemed simple enough, grab the Tandy 1000sx and "get er done". Well what seemed like a possible two hours event, turned into a "WTH" eight hours event. I will...

so I have acquired a Kaypro 10 (see the main board image attached).\ I have attempted to boot it, but the HDD-ready light never comes on though the HDD does "spin up" When the system is turned on, I have a power light on the screen that displays a " Kapro 10 v1.9e " floppy light turns on, and...

okay so I shipped a Model 4 to England, and it's safe and sound except when he powers it up he gets this on the monitor and I am not sure what to suggest to the buyer to find the possible issue would be. any thoughts?

I have a card I discovered while working on a "Model 3 barn find" and I am searching for the manual for it, it is an "APPARAT Model III Disk Controller" by the looks on it, the 50 empty pin and the long line of possible jumpers, it could be configured to not only work for 5.25" floppies but...

It's time for a super deal for you big tandy lovers. 2x Model II's, 2x Drive bays, One Model 2 works just fine, no special cards just the 4 cards basic setup in both systems, the other M2 likely has a power supply issue, and doesn't "turn on" the drive bays are untested, So I am selling: the...

So I Have a Kaypro 10 that I need to restore, it seems to "boot up" but I have no floppy and looks like I will need to reformat/replace the hard drive. so to start, I want to replace my Kaypro 10 floppy drive with a gotek with FlashFloppy; I was wondering if anyone knew what was the standard...