vwestlife
Veteran Member
It would be for a second drive. You can't daisy-chain drives with IDE-XT, so in order to use a second hard drive you'd need a separate cable for it.what's the deal with the second unpopulated 40 pin footprint?
It would be for a second drive. You can't daisy-chain drives with IDE-XT, so in order to use a second hard drive you'd need a separate cable for it.what's the deal with the second unpopulated 40 pin footprint?
Has an XTA2SD device yet been tested in a Tandy 1000 RLX-B system? The behavior of the RLX-B differs slightly from the other XTA-bearing/capable Tandy 1000 systems, seemingly specific to the drive detection routine and subsequent EEPROM write activity at boot.
It would be for a second drive. You can't daisy-chain drives with IDE-XT, so in order to use a second hard drive you'd need a separate cable for it.
There should be a pdf file on the SD-card with some more information.I receive and installed XTA card on my ps/2 model 30 , and work like charm.
Only preparing SD card is not well explained (only a text file), and different hd emulation is not clear for me.
No pdf , can you give github link 2 this project? Would be better a wiki so other can contribute to documentation.There should be a pdf file on the SD-card with some more information.
This is the pdf file I mentioned.No pdf , can you give github link 2 this project? Would be better a wiki so other can contribute to documentation.
If i want prepare disk image on a modern pc how can create .img file from geomery in hex and AA..XX (sectors? cluster?) and viceversa ?This is the pdf file I mentioned.
At the moment there is no program to convert the xx.clu track files to image files and back. This would need a program with deep BIOS/MS-DOS capabilities handling the FAT etc.If i want prepare disk image on a modern pc how can create .img file from geomery in hex and AA..XX (sectors? cluster?) and viceversa ?
Write Speed : 66.41 KB/s
Read Speed : 259.08 KB/s
8K random, 70% read : 8.8 IOPS
Sector random read : 19.8 IOPS
Average access time (includes latency and file system overhead), is 51 ms.
Thank you. I have used Slave/Master switch on IDE HDDs, but never have seen the same switch on IDE/CF adapter. Now I checked once more and have found it.XT-IDE does support double CF-cards, one card as master, the other as slave on the same bus.
Same here, but for the first iteration of the Euro PC.Hello CallinElvis i'm interested in purchasing a PS2XT2SD card to test on my Schneider euro pc and euro pc 2. Getting an external plug to connect it to the same connector as the HD20 would go would be great.
Please message me as i can't send DM's .
I provided the ROM for the Tandy 1100HD - how can i get my hands on one of these cards?Some more info to the XTA2SD card in a Tandy.
TANDY Dos-Gaming-Thread (1000RL/HD) - Page 8 \ VOGONS
www.vogons.org