Commodore 128 Power Port

[robert_sissco]

I am looking at having to possibly move most of my chips to a new 128 board as I am starting to have a lot of issues with mine (masking is flaking off all over, some traces are starting to corrode, etc) and I would like to build it up so I can just move the chips over and test from there, which means I would need my main board in tact in order to test. I can source most of the parts, even the harder to find ones (like the cartridge connector), but I cannot find a source for the power connector on the board. Does anyone know where one can be acquired?

 

[gottjoe]

Here's a possible source:

Alternative To Amiga 500, 600 and 1200 Power Connector - Everything Amiga

In this article I show how an 8-pin round DIN socket and plug could be a viable alternative to Amiga 500, 600, and 1200 power connectors.

www.everythingamiga.com

Joe

 

[robert_sissco]

Here's a possible source:

Alternative To Amiga 500, 600 and 1200 Power Connector - Everything Amiga

In this article I show how an 8-pin round DIN socket and plug could be a viable alternative to Amiga 500, 600, and 1200 power connectors.

www.everythingamiga.com

Joe

Thank you for that, if I cannot source a DIN connector I may need to resort to that (at least for testing), but I am not sure I want to mangle up my power supply. I will weigh this and think on it, thank you

 

[robert_sissco]

Found some

Square DIN-5 Power connector - icomp - en

Amiga spare part

icomp.de