Thanks for this message, my boot floppy disks also did not start, I tried different FF firmware, it did not helpTHAT IT. IT BOOTS DOS !!
YYYYYHHHHHHAAAAAAAAA !!
That is what was needed, Just to change one jumper S0 to S1, and add a jumper to JC !!!
WE did it.
Many thanks everyone !!
All my bootable .img files do boot!!!
Very cool. this will help me out with a lot of things.
Thanks for this message, my boot floppy disks also did not start, I tried different FF firmware, it did not help
But thanks to you everything works for me
As I said, it's right there in the Initial Setup page, in the official wiki.There should be a simple chart somewhere that shows the model/version/revision Gotek, and jumpers for all known computers it can work with. Perhaps a Wiki that can be added/modified as time goes on.
After all this, it was just moving two jumpers to make my unit work between a PC/XT/AT and a Atari ST. But it took about a year for me to find that info.
Just ranting, FYI, etc...