Search results

I picked up a Tandy 4000 computer with some misc cards. It had two modems and two scanner cards. Would seem like a shame to throw these scanner cards away. Can anyone Identify them? If anyone wants them, FREE for the cost of shipping which should not be much in the lower 48. One is labeled...

Picked this up in a Tandy haul yesterday. The connector looks like the external floppy connector on early 5150/5160 floppy disk controllers. Says Tandy number 90-2134 on a label.

So I picked up a Tandy 4000 and Im just trying to test it out. I cant seem to find the settings for the video card online. It says CGA/EGA and have two RCA connectors. I was hoping to try composite video if thats even an option on my workbench. IT had a pin header too in the upper corner above...

Digitech model 710 protocol analyzer with amber CRT and 3.5" floppy drive. What is it!?

Im trying to do some testing with all of my commodore ieee-4888 drives and Its been a long time since I used them. First question. Whats the purpose of the 3 pin jumper on the adapter? "IFC" Is stenciled above them.

I want to soon start my 5170 hercules graphics system restoration... However one point has been nagging at me. What current RAM upgrade cards are there for 16bit AT systems (or newer). There were a bunch of 286 and 386 systems that did not have sim sockets for ram upgrade. I have a BocaRAM AT...

I have been putting this off for a while because of the condition of this unit. I picked it up a couple years back with my Cromemco System One: https://forum.vcfed.org/index.php?threads/finally-after-a-bunch-of-years-of-waiting-and-searching-i-got-one.1240316/ Initial photos of the Drive unit...

Yesterday I was finishing up on my ... I dunno many many year restoration of my Commodore SFD-1001 floppy drive. For some reason that drive has very brittle plastics. While trying to use it I noiced the lever would not close the drive to read a disk. I noticed the pressure block (nylon) had a...

I need to write one floppy disk to replace a corrupted one. LISALIST I downloaded a few disk images and tried my usual methods for writing Mac disks on MY LC but they didnt work. I tried my Floppy emu, but that wont work as the MAC has no idea what to do with a LISA disk image. I just want to...

Spring cleaning continues. I have this still sealed IBM Personal Computer Game Control Adapter. Complete and still sealed. See photos. I already have one open so I dont need a second one. Notice the breadboard area of the card.... Make a reasonable offer plus shipping and its yours. Thanks!

Spring cleaning, this was on my TRS-80 Shelf although it maybe be completely unrelated to TRS. Does anyone know what this paper feed assembly goes to? Its got a 3 wire connector which looks like it only connects to a paper out switch. I have no memories of where I got this from or what it...

Spring Cleaning. This was at the bottom of my stack of TRS-80 Model 1 floppy drives... I know it doest go to a model 1 but can someone tell me what system I own this thing pairs with? Tandy 2000? Tandy 1000? Coco? Would appreciate some insight. Thanks.

Spring cleaning. I have 11 PCMCIA wireless network cards id like to unload. Linksys, SMC, Lucent tech, and Mostly Cisco (I pulled the cisco cards from decommissioned thinclient workstations, the Lucent were taken from the innards of Apple Aiport Base stations) Im asking $12.00 plus shipping...

This came out of a Zenith Sportster 286 which was battery pack fried. Nothing was salvageable. As you can see there is damage to the alluminum frame at the top I fixed with vinegar. The drive is still sealed so there is a chance it may still work. Its connected via ribbon to this board. How do...

Dont know if this thing works as I never had any superdrive disks. Its been on my drive shelf for quite a while and time to be evicted. This is free just pay the cost of shipping. Please take it so I dont throw it away. SPRING CLEANING DEMANDS IT!

Back at the hospital I worked at, you would not believe how much brand new stuff they just threw out. They were going to toss this brand new backup unit but I saved it. had dreams of building a network system to use it but it never happened. As you can see this thing is untouched, I just dont...

Some years ago I responded to a craiglist listing for a huge IMAC G3 Bondi Blue system. All complete in box with tons of accessories. When I got there it was a Lawyers office and everything was still in the box and complete and nothing really looked used at all. This Que Drive was part of it...

Im spending the day organizing and cleaning my work space... I need to do this at least a couple times a year as multiple projects make it impossible to move around. And while cleaning I found my Disney Sound Source I obtained. Havent tested it out yet but its missing the batter compartment...

I have model 3 Id like to fix and bring to the swap meet in june. Does anyone have a 3d printed bracket for a gotek? My plan is to have one real floppy drive and one gotek on the machine. I dont own a 3D printer so I am looking to buy. Mick

I bought a MAgitronic A-B247 Ide card at a good price to try and get my gateway 2000 486 up and running. I cant seem to find the jumper settings for this card when I search for Magitronic or Winbond, was wondering if someone could help me out. The auction showed a photo of a DTK PTI-227B ide...