Need to figure out if this is standard floppy

[haxername]

Pic is from an IBM PS/Valuepoint. I have a Gotek Floppy emulator on the way, and just want to know if it is the same cable.

 

[Patrick.B (TTR)]

you need to pull it from the drive, is a "slot" or "pinholes"
if pinholes, count the holes, if 34 then your good, if 26 then you will need a 26-34pins converter
if it is a slot then you will need a converter from that female slot to a 34pin IDC.

 

[haxername]

you need to pull it from the drive, is a "slot" or "pinholes"
if pinholes, count the holes, if 34 then your good, if 26 then you will need a 26-34pins converter
if it is a slot then you will need a converter from that female slot to a 34pin IDC.

It was pinholes, and it worked. Thank you