Supersoft HR-40(b) hi res graphics board

[VERAULT]

I am late to the party. Thorougly impressed by thr photos posted in the first few posts. Is anyone looking to reproduce this board?

 

[Gary C]

Looks like one was started but Im not sure a board was ever made.

While we have one, I'm not overly excited about removing all the IC's to photograph as its now installed and working.

If someone has a picture of a bare board, I would do the Kicad

 

[AndyG]

The boards have been reversed engineered … you can find details (where I have been participating) at

SuperSoft HRx - Versuch eines Neubaus - VzEkC e. V.

Wird mal Zeit, ein neues Thema anzufangen. Gibt's eigentlich so was wie "genug Grafikboards für den Pet"? Ich denke, nein! :saint:

forum.classic-computing.de

I have built up all of them and they are functional … I also created print routines in machine code to output to 4022,8023p and the 3022

 

[VERAULT]

Will this work on an original pet 2001-8?

 

[Gary C]

The HR-40(B) and the HR-80 are for the 6545 machines and the HR-40 is for the none-CRTC machines

Can't read German but there are pictures of the HR-40 there.

 

[Gary C]

Ghaa !

The HR-80 works perfectly on our 8032-SK which I had out for repairs...

Right up until you try to fit it in the case and find the transformer hits the board before you can close the case

Ah well, time to repair the 8032.

 

[Gary C]

GitHub - InsaneDruid/SuperSede-HRx: A 100% compatible replica of the HR40, HR40B & HR80 graphics boards for the CBM PET lineup

A 100% compatible replica of the HR40, HR40B & HR80 graphics boards for the CBM PET lineup - InsaneDruid/SuperSede-HRx

github.com

 

[AndyG]

Will this work on an original pet 2001-8?

If it is a chiclet keyboard pet with static 6550/6540 chips then no. If you have a dynamic ram pet with 4116 and basic 2/4 roms then the HR-40 will work. The only hi res board I know for the 6550/6540 board is possibly the MTU with side connector….

 

[VERAULT]

If it is a chiclet keyboard pet with static 6550/6540 chips then no. If you have a dynamic ram pet with 4116 and basic 2/4 roms then the HR-40 will work. The only hi res board I know for the 6550/6540 board is possibly the MTU with side connector….

Shame. I was hoping it would work and be the penultimate video upgrade.

 

[AndyG]

Shame. I was hoping it would work and be the penultimate video upgrade.

You could always build up a HAL-PCG6500

 

[VERAULT]

You could always build up a HAL-PCG6500

Is there an open source ptoject with gerbers?

 

[AndyG]

Try here

HAL 6500 Nachbau - VzEkC e. V.

Now not to overload the project file here but would be great to have the HAL PCG 6500 reverse engineered … so you can have programmable character rom…the supersoft hr boards also have programmable char roms but you cannot play some of the HAL games…

forum.classic-computing.de

GitHub - InsaneDruid/PCG-6500: A 100% compatible clone of the programmable character set generator and sound device CBM PET series computers.

A 100% compatible clone of the programmable character set generator and sound device CBM PET series computers. - InsaneDruid/PCG-6500

github.com